Rack Mounting GigaVUE-TA200E

The GigaVUE‑TA200E consists a Rack mounting kit which has 2 front-post brackets, 2 rear-post

brackets, 20 screws, and 2 ear-locking screws. To rack mount the chassis do the following:

Attach the Brackets

1.

Attach each of the front- and rear-post brackets to the node using four of the included bracket screws.

2.

Use an additional two screws to secure each of the rear-post brackets at the mid-point on the sides of the node.

3.

Use the screws and cage nuts supplied with the rack to secure the node in the rack.

Caution: Installing the switch in a rack requires two people. One person should position the switch in the rack, while the other person secures it using the rack screws.

Adjust Rear-Post Bracket Ears

1.

Lock the position of the rear-post bracket ears using the included position-locking screws. You can also adjust the rear-post bracket ears to fit different rack depths from 56 cm to 75 cm.